Features
- Aqua block
- Aqua Block
- Compatibility
- All Underfloor Heating
- Flooring edges
- V Groove
- Flooring Fitting Type
- Fast Fit Glueless
- Flooring format
- Single Plank
- Flooring surface
- Textured
- Resistance
- Hard wearing
Specifications
- Backing material
- Impregnated melamine backing paper
- Colour Description
- Elegant Oak
- Commercial Suitability
- Class 33 Heavy Commercial
- Construction
- Direct faced laminate flooring/melamine impregnated paper/core high density fibreboard
- Construction Material
- HDF
- Lacquered
- Lacquered
- Material
- Laminate
- Pack Size
- 6
- Product Type
- Laminate
- Resistance to staining
-
- Class 33
- Room Suitability
- Bathroom, Kitchen
- Substrate
- HDF
- Thermal conductivity
- 0.9W/mK
Product Measurements
- Length
- 1375mm
- Maximum room dimensions - length
- 8m
- Maximum room dimensions - width
- 8m
- Pack size volume
- 1.33m²
- Thickness
- 12mm
- Weight (Excluding Packaging)
- 14.71kg
- Width
- 188mm
Guarantees & Accreditations
- Abrasion Class
-
- Class 33
- Effect of caster chairs
-
- Class 33
- Guarantee
- 30 Year Finish And Wear Guarantee
- Light fastness
-
- Class 33
- Reaction to fire
-
- Cfl - S1 En ISo 11925-2
- Slip resistance
-
- Class 33
- Guarantees and accreditations
Installation
- Fitting Instructions
-
- For full details please see the fitting instructions supplied with the flooring.
- Important notes
-
- Remove all previous floor coverings
- Must leave 12mm expansion gap around the entire floor including cabinet legs, radiator pipes and door frames
- * Not with underfloor heating
- For timber based sub-floor, lay Bitumen Moisture Barrier Paper
- Use SDH0900 - Howdens 2mm Foam underlay & SDH0909 High Performance Underlay (XPS)*
- The maximum area without additional expansion joints is 8m width x 8m length
- Moisture test must be carried out for all mineral based substrates (2.0 CM % for cement screed and 0.5 CM % for sulphate screed), a relative air humidity of about 40-75% should be maintained
- Sealed packs must be stored for at least 48 hours where they are to be laid
- High performance Underlay (XPS) is not suitable when using underfloor heating
- Installation notes
-
- Make sure that you apply a flooring joint sealer (SDH0099) down the long & the short profile before clicking together - (and wipe away any excess immediately after clicking together) - in order to achieve optimum moisture resistance
- Laying detail
- Must be laid as a floating floor (see instructions)
