Features
- Aqua Block
- Aqua Block
- Cleaning
- Easy to Clean
- Compatibility
- Screed Embedded Radiant or Electrical Underfloor Heating
- Flooring Edges
- Square
- Flooring Fitting Type
- Fast Fit
- Flooring Format
- Tile
- Flooring Surface
- Textured
- Resistance
- Hard Wearing
Specifications
- Collection
- Livyn
- Colour Description
- Light Grey Travertine
- Commercial Suitability
- Class 32 General Commercial
- Construction
- 3 Part PVC construction
- Material
- PVC
- Pack Size
- 5
- Product Type
- Vinyl
- Resistance to Staining
-
- EN 13329 - Group 1 + 2 (Grade 5) & Group 3 (Grade 4)
- Room Suitability
- Bathroom, Kitchen
- Thermal Conductivity
- 0.015 W/mK
- Thermal Resistance
- 0.015(m²K)/W
Product Measurements
- Length
- 1300mm
- Pack Size Volume
- 2.08m²
- Thickness
- 4.5mm
- Weight (Without Packaging)
- 16.55kg
- Width
- 320mm
Guarantees & Accreditations
- Abrasion Class
-
- AC4 - medium commercial use
- Effect of Caster Chairs
-
- EN 13329- 25,000 cycles no change
- Flooring Use
-
- Class 23 Heavy Domestic
- Guarantee
- 20 Year Residential Guarantee
- Impact Resistance
-
- EN 13329 - Class IC2
- Light Fastness
-
- EN 13329 Blue Scale class 6
- Reaction to Fire
-
- Class Efi - EN14041
- Secondary Guarantee
- 10 Year Medium Commercial Guarantee
- Slip Resistance
-
- EN 13893 Technical Class DS
- Guarantees and accreditations
Installation
- Fitting Instructions
-
- For full details please see the fitting instructions supplied with the flooring.
- Important Notes
-
- Underfloor heating systems (water / electrical) should be built into a layer of screed when used in conjunction with Quick-Step Livyn flooring and kept at a constant room temperature of 18°C (64°F) during installation and for 48h after installation. Once installed the floor surface temperature must not go above a maximum of 27°C (80°C). Separate rooms or rooms with different underfloor heating systems should be installed with a transition profile.
- Remove all previous floor coverings
- Do not install cabinets over the floor
- Use Howdens Vinyl Underlay
- Always allow the product to acclimatise to the room in which it is being laid for at least 48 hours. It must be stored horizontally on a level surface. The temperature must be between 15-25 degrees C and be maintained prior to, during and at least 24 hours after installation
- Always allow a 2mm expansion gap around the perimeter of the room between the installation and any solid objects such as skirting, radiator pipes and cabinets
- The subfloor must be smooth and level
- If there is underfloor heating a 5mm expansion gap must be left around the perimeter of the room and any solid objects such as skirting, radiator pipes and cabinets
- Laying Detail
- Must be laid as a floating floor (see instructions)
