Oake and Gray Dark Oak Laminate Flooring 2.179m² Pack

Name: Oake and Gray Dark Oak Laminate Flooring 2.179m² Pack
Brand: Oake and Gray

(0 Reviews)

PRODUCT CODE: SDH3558

Add a modern floor to a home by picking this laminate design from Oake & Gray, available in a dark-oak shade.

Create a fashionable design with this dark-oak, laminate flooring, which replicates the look of real wood for less. Meanwhile, the bevelled edges and textured finish provide a premium effect. Made from laminate, it is moisture and water-resistant once professionally fitted and sealed. It can also be fitted with underfloor heating to create a welcoming interior.

Pack Size Volume 2.179m²
Fitting Type Click
Room Suitability Bathroom, Bedroom, Conservatory, Dining Room, Hallway, Kitchen, Boot Room, Utility Room, Home Office, Living Room

View All Oake and Gray Flooring

Features

Aqua Block Aqua Block

Compatibility All Underfloor Heating

Flooring Edges Bevelled

Flooring Features Easy to install large board format, Environmentally Friendly, PVC free, V Groove Edges Adds Authenticity to the Feel of the Planks, Warm and quiet underfoot

Flooring Format Plank

Flooring Locking System Uniclic

Flooring Surface Textured

Moisture Resistant Moisture Resistant

Resistance Type Scratch and Stain Resistant

Water Resistance Water Resistant

Specifications

Colour Description Dark Oak

Commercial Suitability Class 32 General Commercial

Construction Direct faced laminate flooring/melamine impregnated paper/core high density fibreboard

Finish Matt

Flooring Type Laminate

Glue/Resin Urea - Resin

Material HDF

Moisture Content 8% +/- 2%

Pack Size 9

Product Type Flooring

Residential Suitability Class 23 Heavy Domestic

Room Suitability Bathroom, Bedroom, Conservatory, Dining Room, Hallway, Kitchen, Boot Room, Utility Room, Home Office, Living Room

Style Wood Effect

Thermal Resistance 0.055(m²K)/W

Underlay No Integrated Underlay

Product Measurements

Length 1261mm

Maximum Room Dimensions - Length 13m

Maximum Room Dimensions - Width 13m

Pack Size Volume 2.179m²

Thickness 8mm

Weight (Without Packaging) 15.532kg

Width 192mm

Guarantees & Accreditations

Abrasion Class Class 32

Accreditations CE Marked

Effect of Caster Chairs EN 13329- 25,000 cycles no change

25 Year Residential Guarantee

Impact Resistance EN 13329 - Class 32

Light Fastness ISO 105-B02 ≥6

Reaction to Fire EN 13501-1 CFL s1

Resistance to Staining EN 438 Group 1-3 Grade 4-5

Slip Resistance EN 13893 Technical Class DS

Timber Certification PEFC

Guarantees and accreditations

Installation

Care and Maintenance Direct sunlight may have an effect on the colour of the floor over a period of time, Do not leave standing water on the floor, wipe up any spills immediately, Do not use abrasive cleaners, bleach or wax to maintain the floor., Do not use abrasive cleaning materials: scouring powders, steel wool, metal brushes etc., Do not use cleaning agents containing wax, polish or oil, Do not use steam mops or cleaners, General cleaning of the floor should be done using a soft broom or vacuum cleaner, Place a walk-off mat at outside entrances to reduce the amount of dirt brought into your home. Do not use mats with a latex or rubber backing since these backings can cause permanent discoloration., Self-adhesive pads and castor cups should be fitted to furniture to avoid scratching where applicable. Note: Heavy scratching could break the seal on the flooring causing damage, Use the floor exclusively under the recommended conditions outlined in the instructions

Fitting Instructions For full details please see the fitting instructions supplied with the flooring.

Fitting Type Click

Important Notes Do not install cabinets over the floor, For timber based sub-floor, lay Bitumen Moisture Barrier Paper, Suitable for use with Foam Underlay, High Performance Underlay, Damp Proof Membrane, Paintable Damp Proof Membrane and Bitumen Moisture Barrier Paper, The expansion gap must be at least 2mm for each 1m span across the timber floor, Using a moisture meter ensure the room humidity level is between 40 - 65%. Screed / concrete floors must be under 2% moisture content, We recommend that heating should have been operating in the room for at least two weeks to ensure a stable temperature level, When Flooring Is Laid We Recommend Leaving a Minimum Perimeter Expansion Space of 8mm. This Will Be Covered by Skirting or Trim, Where chipboard and floorboards are the intended sub-floor it is recommended that a 12mm thick plywood or OSB is used. This especially applies when fitting timber flooring to a ground floor or below, where bitumen moisture barrier paper should be used between floorboards and the ply or OSB

Installation Notes A damp mat must not have prolonged contact with laminate flooring, After installation, any expansion gaps should be filled with a flexible silicone sealant which can then be covered with skirting, beading or across thresholds with a door-bar, Bathroom floors can be installed as normal, Ensure that after bathing / showering this mat is removed from the floor to dry, Extra care must be taken when using laminate flooring in bathrooms due to the increased risk of water damage, Make sure that any spilt water is wiped from the floor immediately and that you use a bath mat when getting out of the bath / shower, Make sure that you apply a flooring joint sealer (SDH0099) down the long & the short profile before clicking together - (and wipe away any excess immediately after clicking together) - in order to achieve optimum moisture resistance, Not suitable for wet rooms or saunas, Perimeter of floor should be sealed with flexible sealant, Under no circumstances should the toilet, bath or sink pedestal ever be screwed directly to the floor, instead a 12mm expansion gap should be left around the base

Laying Detail Must be laid as a floating floor (see instructions)

Underfloor Heating Detail Floor temperature must not exceed 80°F / 27°C. Turn the heat off for 24 hours before, during and 24 hours after installation when installing over radiant heated subfloors. Before installing over newly constructed radiant heat systems, operate the system at maximum capacity to force any residual moisture from the cementitious topping of the radiant heat system. Make sure that the temperature in the room is maintained consistent between 70-80°F / 20-25°C before and during the installation.

Documents

Oake & Gray Laminate Instructions

DOWNLOAD.pdf [2.57MB]
Oake & Gray Laminate Instructions

[2.57MB]

Suggested Searches

Suggested Categories

Suggested Products

Oake and Gray Dark Oak Laminate Flooring 2.179m² Pack