Specifications
- Colour Description
- Oak
- Construction Material
- Oak Veneer
- Core Material
- Particleboard
- Door construction
-
- Veneered particleboard
- Door Finish Type
- Unfinished
- Door Location
- Internal
- Finish With
- Varnish, stain or Osmo oil
- Glazed
- Unglazed
- Glue/Resin
-
- PVA - Type D3/D4
- Lipping Material
- American White Oak or KSK
- Moisture Resistant
- Not moisture resistant
- Number of Panels
- 4
- Pre-finished
- Not pre-finished
- Primed
- Not primed
- Product Type
- Standard
- Range Name
- Rockingham
- Surface veneer thickness
- 0.6mm
- Veneer grade
- A
- Veneer timber species
- American White Oak
- Veneered
- Veneered
Product Measurements
- Bottom Rail
- 185mm
- Door centre panel thickness
- 19mm
- Door lipping thickness - bottom
- 10mm
- Door lipping thickness - sides
- 10mm
- Door lipping thickness - top
- 10mm
- Height
- 1981mm
- Height (Imperial)
- 6'6"
- Middle Rail
- 160mm
- Stile
- 120mm
- Thickness
- 35mm
- Weight (Excluding Packaging)
- 26.584kg
- Width
- 610mm
- Width (Imperial)
- 2'0"
Guarantees & Accreditations
- Fire Rating
- Not Fire Rated
- Guarantees and accreditations
Installation
- Door Edging Maximum Trim Bottom
- 5mm
- Door Edging Maximum Trim Each Side
- 5mm
- Door Edging Maximum Trim Top
- 5mm
- Edging additional information
- An equal amount of timber should be removed from each side/ top & bottom. Remaining within the parameters of the maximum trim instructions ensures the construction of the door is not compromised.
- Fitting Instructions
-
- Please refer to door instructions for all fitting information.
- For identification, the Howdens logo, SKU code and batch number is on the top edge of the door.
- This door has a particleboard core which may be exposed if rebated. The use of the oak door pair maker is therefore recommended.
- This door is not suitable for waxes, polishes and/or oils (except Osmo Oil) as these products do not seal the door properly and may cause veneer delamination.
- Lock Block Additional Information
- A lock block is not included on this door as it is a solid construction. The lock can be fitted in any location on either side, avoiding mid rail joints as this can weaken the structure of the door.