Back to Flooring

Howdens 3 Strip Oak Engineered Flooring 3.18m² Pack

Name: Howdens 3 Strip Oak Engineered Flooring 3.18m² Pack
Brand: Howdens
Rating: 4.9 (7 reviews)

(7 Reviews)

PRODUCT CODE: SDH3220

Enjoy the natural look and feel of this three-strip Real Wood oak flooring.

Bring style and charm into your home with our Real Wood oak flooring. Its three-strip design will add a unique look to your room and the slight colour variations will enhance the natural look of your flooring. It is suitable for kitchens and living areas and its fast fit design means it is quick and easy to install.

Pack Size Volume 3.18m²
Fitting Type Click
Room Suitability Kitchen, Dining Room, Hallway, Bedroom, Conservatory, Home Office, Living Room

View All Howdens Flooring

Features

Aqua Block Does not have Aqua Block

Compatibility All Underfloor Heating

Flooring Edges Square

Flooring Format 3 Strip

Flooring Locking System Fast Fit

Flooring Surface Open Grain

Moisture Resistant Not Moisture Resistant

Resistance Type UV Resistant

Restoration Fully restorable

Water Resistance Not Water Resistant

Specifications

Backing Material Pine Grade 3

Colour Description Oak

Commercial Suitability Not Suitable for Commercial Use

Construction 3 layered board

Finish Matt

Finished with Lacquer

Flooring Type Wood, Engineered Wood

Glue/Resin Glue U-F - Resin 1206, 1274, Hardener - 2505, 7500 Casco-Nobel Sweden

Material Real Wood

Moisture Content 7% +/- 2%

Pack Size 7

Product Type Flooring

Room Suitability Kitchen, Dining Room, Hallway, Bedroom, Conservatory, Home Office, Living Room

Style Wood Effect

Supplied With 7 Full planks or 6 full plank and 2 halves

Thermal Resistance 0.1019(m²K)/W

Underlay No Integrated Underlay

Product Measurements

Length 2200mm

Maximum Length of Timber Shake 200mm

Maximum Room Dimensions - Length 20m

Maximum Room Dimensions - Width 8m

Maximum Width of Timber Shake 8mm

Pack Size Volume 3.18m²

Thickness 14mm

Weight (Without Packaging) 25.589kg

Width 207mm

Guarantees & Accreditations

Abrasion Class STN 492120 - 0.062G/1000 revolutions

Accreditations CE Marked

20 Year Residential Guarantee

Impact Resistance STN 492120 - max 1mm

Reaction to Fire Dfl - s1

Resistance to Staining EN 13442 Grade ≥4.

Slip Resistance EN 14342: 2005 + A1:2008 and CEN/TS 15676:2007

Timber Certification FSC

Guarantees and accreditations

Installation

Care and Maintenance We recommend that floor mats are used at entrances to the property - this will help avoid abrasive particles damaging the surface, Self-adhesive pads and castor cups should be fitted to furniture to avoid scratching where applicable. Note: Heavy scratching could break the seal on the flooring causing damage, Move furniture carefully to avoid damaging the top layer surface, General cleaning of the floor should be done using a soft broom or vacuum cleaner, A well rung out mop can also be used periodically, however avoid the use of excess water, Do not use steam mops or cleaners, Do not leave standing water on the floor, wipe up any spills immediately, Do not use cleaning agents containing wax, polish or oil, Direct sunlight may have an effect on the colour of the floor over a period of time, Use the floor exclusively under the recommended conditions outlined in the instructions

Fitting Instructions For full details please see the fitting instructions supplied with the flooring.

Fitting Type Click

Important Notes Remove all previous floor coverings, Moisture test must be carried out for all mineral based substrates (2.0 CM % for cement screed and 0.5 CM % for sulphate screed), a room temperature of 18° C - 24° C, a relative humidity of about 45-60% should be maintained, Sealed packs must be stored for at least 48 hours where they are to be laid. Do not open packs until you are ready to install the flooring. Packs are to be laid flat on the floor with at least 50cm between packs and walls. Packs should be stored in a room with a minimum temperature of 18°C, Must leave 15mm expansion gap around the entire floor including cabinet legs, radiator pipes and door frames, Do not install cabinets over the floor, The maximum area without additional expansion joints is 8m width x 20m length, If laying over a stone/mineral sub-floor, lay SDH0910 - Howdens Damp Proof Membrane (at least 0.2mm thick PE foil) first as a "trough" (i.e. lay over the floor and extend ends and sides up the walls for a few centimetres) or SDH0931 Paintable Damp Proof Membrane, For timber based sub-floor, lay Bitumen Moisture Barrier Paper, Use SDH0900 - Howdens 2mm Foam underlay & SDH0909 High Performance Underlay (XPS)*, High performance Underlay (XPS) is not suitable when using underfloor heating

Laying Detail Must be laid as a floating floor (see instructions)

Underfloor Heating Detail Floor temperature must not exceed 27°

Documents

Flooring Care and Maintenance Manual

DOWNLOAD.pdf [0.97MB]
Flooring Care and Maintenance Manual

[0.97MB]
Installation / Fitting Instructions Howdens Fast Fit Engineered Real Wood Flooring

DOWNLOAD.pdf [2.52MB]
Installation / Fitting Instructions Howdens Fast Fit Engineered Real Wood Flooring

[2.52MB]
Howdens Flooring Wheelchair Suitability

DOWNLOAD.pdf [0.05MB]
Howdens Flooring Wheelchair Suitability

[0.05MB]
Spec Sheet SDH3220 Howdens 3 Strip Oak Engineered Flooring 3.18m² Pack

DOWNLOAD.pdf [1.55MB]
Spec Sheet SDH3220 Howdens 3 Strip Oak Engineered Flooring 3.18m² Pack

[1.55MB]

Reviews 4.9

(7 Reviews)

Suggested Searches

Suggested Categories

Suggested Products

Howdens 3 Strip Oak Engineered Flooring 3.18m² Pack